基于AHP的舰船大风浪中航行安全评价

舰船在大风浪中航行的风险是一个比较重要的研究领域,其风险程度很难用量化进行评估.为了更好地方便研究,并为以后的研究奠定理论基础,采用了层次分析法,建立舰船在大风浪中航行的安全评价体系,同时构造了判断矩阵,并进行了层次单排序一致性检验,求出了每个影响舰船航行安全因素的权重,并通过实例进行解算,得出结果和实际情况相比大致相似.此方法可以较好地对舰船在大风浪中航行的安全进行直观的描述,可供舰船长用来掌握舰船航行的风险情况,进而进行有效的风险决策.     

燃烧室压力对潜入式喷管喉衬热应力的影响

为了研究燃烧室压力对固体火箭发动机潜入式喷管热应力影响规律的问题,采用商业流体软件,基于压力求解器,求解了喷管纯气相的流场,确定了燃气温度、压力、壁面对流换热系数;采用有限元软件,依据流场计算的非均布壁面压力与非均布对流换热,求解了燃烧室压力为6 MPa下的潜入式喷管热结构问题;通过地面点火试验验证了仿真模型与数值方法的有效性与准确性;采用相同计算模型与数值方法,求解了在燃烧室压力为9 MPa、12 MPa下的喷管热结构问题,揭示了燃烧室压力对喉衬热应力的影响规律。结果表明:整个工作过程,喉衬环向应力最大值为103.9 MPa,位于内表面,且随时间增大,先增大后减小;喉衬环向拉应力也随时间先增大后减小;随压力增大,对流换热系数增大,喉衬温度升高,喉衬环向拉应力增大,喉衬环向压应力减小。     

Effect of friction stir processing on mechanical properties and heat transfer of TIG welded joint of AA6061 and AA7075

Tungsten inert gas (TIG) welding is the most commonly used joining process for aluminum alloy for AA6061 and AA7075 which are highly demanded in the aerospace engineering and the automobile sector, but there are some defects occur during TIG welding like micro-crack, coarse grain structure, and porosity. To improve these defects, the TIG welded joint is processed using friction stir processing (FSP). This paper presents the effect of friction stir processing on TIG welding with filler ER4043 and ER 5356 for dissimilar aluminum alloy AA6061 and AA7075. The mechanical characterization, finite element formulation and mathematical equations of heat transfer of TIG + FSP welded joints are investigated using ANSYS Fluent software by adjusting process parameters of FSP. The results show that the maximum compressive residual stress 73 MPa was obtained at the fusion zone (FZ) of the TIG weldment with filler ER4043, whereas minimum compressive residual stress 37 MPa was obtained at stir zone (SZ) of the TIG+FSP with filler 5356. The maximum heat flux 5.33 × 106 W/m2 and temperature 515 ℃ have observed at tool rotation 1600 rpm with a feed rate of 63 mm/min. These results give a satisfactory measure of confidence in the fidelity of the simulation     

Experimental and numerical study of the blast wave decrease using sandwich panel by granular materials core

Among the intrinsic properties of some materials, e.g., foams, porous materials, and granular materials, are their ability to mitigate shock waves. This paper investigated shock wave mitigation by a sandwich panel with a granular core. Numerical simulations and experimental tests were performed using Autodyn hydro-code software and a shock tube, respectively. The smoothed particle hydrodynamics (SPH) method was used to model granular materials. Sawdust and pumice, whose properties were determined by several compression tests, were used as granular materials in the sandwich panel core. These granular materials possess many mechanisms, including compacting (e.g., sawdust) and crushing (e.g., pumice) that mitigate shock/blast wave. The results indicated the ineffectiveness of using a core with low thickness, yet it was demonstrated to be effective with high thickness. Low-thickness pumice yielded better results for wave mitigation. The use of these materials with a core with appropriate core reduces up to 88% of the shock wave. The results of the experiments and numerical simulations were compared, suggesting a good agreement between the two. This indicates the accuracy of simulation and the ability of the SPH method to modeling granular material under shock loading. The effects of grain size and the coefficient of friction between grains have also been investigated using simulation, implying that increasing the grain size and coefficient of friction between grains both reduce overpressure.     

双浮体波浪能转换装置中重心布置对波浪能吸收影响分析

提出一种基于横摇运动的双浮体波浪能转换装置,利用水面浮体与水下浮体之间的相对横摇运动实现对波浪能的吸收。在保持水下浮体稳定的前提下,水面浮体的横摇运动决定了整个装置对波浪能吸收情况。水面浮体的横摇运动受其横摇固有频率的影响,主要是重心布置。为了合理选择水面浮体的重心位置,采用数值分析的方法对箱型浮体在长峰不规则波下的工作情况进行分析,讨论重心布置对波浪能吸收的影响以及对PTO参数选择的影响。结果表明,重心的布置可改变波浪能吸收的频段,重心布置越低,可吸收的波浪能频段越广,越有利于波浪能的吸收。     

ORGANISING THE BLUES

While all governments in the region acknowledge the importance of the work of police officers, they seldom take a close look at their working conditions and the nature of police labour. While the situations in Namibia, Zimbabwe, Zambia, Lesotho and Swaziland are different there are commonalities: police management has not changed significantly and neither has police legislation. Key concerns of the officers in the region centre on service conditions and wages. Communicating these concerns to the state is made difficult by the less than democratic approach taken by governments professing to favour democratization. A more democratic workplace for the police is of benefit to the broader community and is a crucial point to bear in mind when attempting to develop community-oriented professional policing.     

基于步进加速寿命试验的制导弹药储存寿命评估

介绍步进应力加速寿命试验原理,通过对制导弹药自动导引头贮存状态和失效机理的分析,确定了加速寿命试验应力和应力水平．假设产品寿命服从威布尔分布,应用极大似然估计和Bayes的方法处理数据,建立制导弹药可靠储存寿命预测模型,并计算得到自动导引头在正常应力水平下的可靠储存寿命．     

漂浮式微型波力发电装置传动系统的速度分析与调节

针对边防驻岛官兵用电难的问题,结合海洋波浪能特点,提出了一种新型漂浮式微型波力发电装置。基于装置结构模型,分析了其结构特征和工作原理;建立了传动系统的运动学模型,分析了其运动特性和速度调节性能;进行算例分析,验证了理论模型的正确性。研究表明：双侧传动轮系输入系统优于单侧传动轮系输入系统;改变飞轮的转动惯量,可以调节速度的波动。分析结果为该装置的后续试验研究提供了理论依据。     

悬臂式围护桩受力性状与内力传递特征试验

为研究悬臂式围护桩结构的内力、弯矩、位移和嵌固段的变化规律及特点,结合西宁火车站综合改造工程,对该深基坑支护结构在不同开挖工况条件下悬臂桩的受力性状与内力传递特征进行现场动态测试试验。试验结果表明:悬臂桩的受力特征与理论值有所差异,在实际设计中可对其在配筋方式、混凝土强度设计、嵌固段长度等方面进行优化。试验结果可以有效优化桩身设计,为复杂基坑在开挖过程中的支护结构受力及变形提供参考性依据。     

Study of simple plane wave generator with an air-metal barrier

Plane wave generators (PWGs) are used to accelerate flyer plates to high velocities with their generated plane waves, which are widely used in the test of dynamic properties of materials. The traditional PWG is composed of two explosives with different detonation velocities. It is difficult to implement the related fabrication processes and control the generated waves due to its complicated structures. A simple plane wave generator is presented in this paper, which is composed of two identical cylindrical high explosive (HE) charges and an air-metal barrier. A theoretical model was established based on two different paths of the propagation of detonation waves, based on which the size of air-metal barrier was calculated for a given charge. The corresponding numerical simulations were also carried out by AUTODYN-2D^® based on the calculated results, which were used to compare with the theoretical calculations. A detonation wave with a flatness of 0.039 μs within the range of 70-percent diameter of the main charge was obtained through the simulations.